O-IGPS-RX884GTP+
Layer 3 20-port managed Gigabit Ethernet switch. 8x10/100/1000 Base-T(X) ports, 8x10/100/1000 Base-T(X) P.S.E. ports, 4x1G/10GBase-X ports, SFP+
- Support 8-ports IEEE 802.3af/at compliant PoE and total power budget is 100W with maximum 30W per port
- Support routing protocols – Static routing, RIP v1/v2, OSPF, PIM-SM, PIM-DM, VRRP
- IEEE 802.1AS for timing & Synchronization
- Support O-Ring(recovery time < 30ms) and MSTP(RSTP/STP compatible) for Ethernet Redundancy
- O-Chain allow multiple redundant network rings
- Provided HTTPS/SSH protocol to enhance network security
- Support SNTP client
- Support application-based QoS management
- Support DOS/DDOS auto prevention
Datasheet
Product Specification
| Model | IGPS-RX884GTP+ |
| Physical Ports | |
| 10/100/1000Base-T(X) Ports in RJ45 Auto MDI/MDIX | 8 |
| 10/100/1000Base-T(X) P.S.E Ports in RJ45 Auto MDI/MDIX | 8 |
| 1G/2.5G/10GBase-X with SFP+ port | 4 |
| Technology | |
| Ethernet Standards | IEEE 802.3 for 10Base-T IEEE 802.3u for 100Base-TX and 100Base-FX IEEE 802.3ab for 1000Base-T IEEE 802.3z for 1000Base-X IEEE 802.3ae for 10Gigabit Ethernet IEEE 802.3x for Flow control IEEE 802.3ad for LACP (Link Aggregation Control Protocol) IEEE 802.1p for COS (Class of Service) IEEE 802.1Q for VLAN Tagging IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol) IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol) IEEE 802.1x for Authentication IEEE 802.1AB for LLDP (Link Layer Discovery Protocol) IEEE 802.1AS for Timing and Synchronization IEEE 802.1Qat for Stream Reservation IEEE 802.1Qav for Forwarding and Queuing Enhancements for Time-Sensitive Streams IEEE 802.3af/at PoE specification |
| MAC Table | 16k |
| Priority Queues | 8 |
| Packet Buffer | 2MB |
| Flash Memory | 512Mbits |
| DRAM Size | 8Gbits |
| Jumbo frame | Up to 12K Bytes |
| Processing | Store-and-Forward |
| Switch Properties | Switching latency: 7 us Switching bandwidth: 112Gbps Throughput (packet per second): 83.32Mpps@64Bytes packet Max. Number of Available VLANs: 4095 VLAN ID Range : VID 1 to 4094 IGMP multicast groups: 128 for each VLAN Port rate limiting: User Define |
| Security Features | Enable/disable ports, MAC based port security Port based network access control (802.1x) MAC-based authentication(802.1x) VLAN (802.1Q ) to segregate and secure network traffic Radius centralized password management SNMPv3 encrypted authentication and access security Web and CLI authentication and authorization IP source guard Https / SSH enhance network security |
| Software Features | STP/RSTP/MSTP (IEEE 802.1D/w/s) Redundant Ring (O-Ring) with recovery time less than 30ms TOS/Diffserv supported Quality of Service (802.1p) for real-time traffic VLAN (802.1Q) with VLAN tagging IGMP Snooping Application-based QoS management DOS/DDOS auto prevention Port configuration, status, statistics, monitoring, security Port mirroring DHCP Server/Client/Relay SNTP Client |
| Network Redundancy | O-Ring O-Chain MSTP/RSTP/STP |
| Routing Protocols | Unicast Routing - Static routing, RIP v1/v2, OSPF Multicast Routing -PIM-SM, PIM-DM Routing Redundancy -VRRP |
| PoE management | PoE configuration PoE Status PoE Scheduling(turn on/off the PoE device) Auto-Ping check(Reboot PDs if there is no responses) |
| RS-232 Serial Console Port | RS-232 in DB9 connector with console cable. 115200bps, 8, N, 1 |
| LED Indicators | |
| Power Indicator (PWR) | Green : Power LED x 3 |
| Ring Master Indicator (R.M.) | Green : Indicates that the system is operating in O-Ring Master mode |
| O-Ring Indicator (Ring) | Green : Indicates that the system operating in O-Ring mode Green Blinking : Indicates that the Ring is broken |
| Fault Indicator (Fault) | Amber : Indicate unexpected event occurred |
| 10/100/1000Base-T(X) RJ45 Port Indicator | Upper for Link/Act indicator, Green for Link/Act indicator Lower for speed indicator,Green for 1000Mbps, Amber for 100Mbps, Off-light for 10Mbps |
| 10/100/1000Base-T(X) RJ45 P.S.E Port Indicator | Upper for Link/Act indicator, Green for Link/Act indicator Lower for PoE indicator, Green for PoE enable |
| 1G/2.5G/10GBase-X SFP+ Port Indicator | Green for port Link/Act. |
| Fault contact | |
| Relay | Relay output to carry capacity of 1A at 24VDC |
| Power | |
| Redundant Input Power | Dual DC inputs 50~57VDC on 6-pin terminal block |
| Power consumption (Typ.) | 20W(without PoE) |
| Total PoE power budget | 100W@75oc/180W@60oC |
| Overload current protection | Present |
| Reverse polarity protection | Present |
| Physical Characteristics | |
| Enclosure | IP-30 |
| Dimensions (W x D x H) | 116 x 170 x 180 mm |
| Weight (g) | 2800 g |
| Environmental | |
| Storage Temperature | -40 to 85oC (-40 to 185oF) |
| Operating Temperature | -40 to 75oC |
| Operating Humidity | 5% to 95% Non-condensing |
| Regulatory Approvals | |
| EMC | CE EMC (EN 55024, EN 55032), FCC Part 15 B |
| EMI | EN 55032, CISPR32, EN 61000-3-2, EN 61000-3-3, FCC Part 15 B class A |
| EMS | IEC/EN 61000-4-2 (ESD) IEC/EN 61000-4-3 (RS) IEC/EN 61000-4-4(EFT ) IEC/EN 61000-4-5 (Surge) IEC/EN 61000-4-6 (CS) IEC/EN 61000-4-8(PFMF) |
| Shock | IEC60068-2-27 |
| Free Fall | IEC60068-2-31 |
| Vibration | IEC60068-2-6 |
| Safety | EN60950-1 |